|
|
Sealants, Adhesives & Lubricants
Sealants & Adhesives
Barnwell stock Sealants and Adhesives from the worlds leading manufacturers including Bondloc, Loctite, Permabond, Holdtite, Molykote, Truloc, Bostik, Hylamar, Dow Corning and Dunlop.
Barnwell has a vast range of instant Cyanoacyrlate (Superglue) adhesives but also supply Threadlocking grades, Gasket Sealants, Retaining Compounds, Pneumatic/Hydraulic Sealants and Metal filled compounds for use in a wide variety of industries including aerospace, automotive, medical device manufacture, defence (Mil-Spec), plumbing & sprinkler systems, oil & gas, electronics, plus many other diverse applications.
In addition to engineering adhesive solutions, Barnwell also stock a comprehensive range of Sealants including Silicone sealant and instant gasket makers. Primers, Activators and Structural Bonding.
Industrial Lubricants
Barnwell stock a comprehensive range of durable industrial lubricants that thrive in the toughest applications where conventional lubricants fail. Formulated to withstand the rigors of heavy loads, dirty, dusty or chemically harsh environments, these products provide your operation with total, high performance industrial lubrication.
These quality products can help you achieve maximum bond performance,better production throughput and genuine cost savings and our knowledgeable and highly trained staff are able to offer you advice on a wide selection of products for every application.
Sealant Range
|
NUTLOC B243
Oil tolerant adhesive for direct application to ‘as received’ parts. Locks
threads and prevents loosening. Seals out moisture to prevent corrosion
- Oil tolerant
- Prevents loosening
- Chemical resistant
- Medium strength
- Temperature resistance -55° to + 150° C
50ml Bottle. Product references: B243 (50ML) & B243C (50ML) Clam Pack
Also available in 10ml, 25ml and 250ml |
|
STUDLOC B270
Anaerobic adhesive for locking threads and preventing loosening.
Use on all studs up to 1” diameter and coarse threaded bolts and casting
interfaces.
- Locks threads
- Prevents loosening
- High breakaway strength
- High strength
- Temperature resistance -55° to + 150° C
50ml Bottle. Product references: B270 (50ML) & B270C (50ML) Clam Pack
Also available in 10ml, 25ml and 250ml |
|
HYDRAULIC SEAL (Threadloc) B542
Used for all types of hydraulic connections, sealing against typical
pressure line ratings. Use to fit valves and threaded couplings.
- Ideal for all types of metal parts
- Locks and seals hydraulic & pneumatic fittings
- High pressure resistant
- Medium strength
- Temperature resistance -55° to + 150° C
50ml Bottle. Product references: B542 (50ML) & B542C (50ML) Clam Pack
Also available in 25ml and 250ml |
|
HIGH STRENGTH RETAINER B638
Increases the torsional strength and enables slip-fitted parts to withstand
higher cyclic loadings.
- Use to retain and seal heavy duty parts
- Typical fixture time is 5 minutes
- Temperature resistance -55° to + 120° C
50ml Bottle. Product references: B638 (50ML) & B638C (50ML) Clam Pack
Also available in 10ml, 25ml and 250ml |
|
BEARING FIT B641
Recommended for use on parts that may need future dismantling.
- Gap fills to 0.2mm diametrically
- Replaces mechanical fixings
- Medium strength
- Temperature resistance -55° to + 150° C
50ml Bottle. Product references: B641 (50ML) & B641C (50ML) Clam Pack
Also available in 10ml, 25ml and 250ml
|
 MINI-MATE MRO KIT
An open and shut case for all your MRO Adhesives & Sealants!
For the most demanding maintenance and repair applications, including Threadlocking, Threadsealing, Gasketing and Bonding.
Barnwell supplies a comprehensive range of Adhesives, Sealants and Lubricants. Whatever the application, we can provide quality products and expert advice.
Contact your nearest Barnwell Service Centre for more details. |
|
